Flown a few times with lots of repaired damage, most of the damage occurred on hand launches gone wrong.
It may not look that pretty around the nose but it is sound enough as it is to fly. Since the plane is constructed of foam it is practically indestructible as long as there is epoxy glue around.
Additional required items for flying:
3 channel micro receiver,
3 to 4 channel transmitter,
30 amp electronic speed control (ESC),
3 cell 1800 mah Lipo battery or equivalent.
Also available are repair kits:
comprising of fuselage and fin replacement parts,
wing and tail parts,
duct ed fan replacement parts
Hand Launch Demonstration Video
It may not look that pretty around the nose but it is sound enough as it is to fly. Since the plane is constructed of foam it is practically indestructible as long as there is epoxy glue around.
27.5 inch (698 mm) wing span
All servos and control linkage installed.
Engine access hatch removed for viewing the 70 mm electric duct ed fan unit.
Battery and electronics equipment compartment.
View looking down the tail pipe showing the ducted fan unit installed.
3 channel micro receiver,
3 to 4 channel transmitter,
30 amp electronic speed control (ESC),
3 cell 1800 mah Lipo battery or equivalent.
Also available are repair kits:
comprising of fuselage and fin replacement parts,
wing and tail parts,
duct ed fan replacement parts
Fuselage, wing, tail and fin replacement parts shown above.
Spare ducted fan parts shown above.
Package deal 125 dollars
crockerdh@aol.com
No comments:
Post a Comment